Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
51
NISE 50-J1900 User Manual
Chapter 4: BIOS Setup
IT8528 H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
CPU temperature(DTS)
Detects and displays the current CPU temperature.
System temperature
Detects and displays the current system temperature.
VCore to VCC5
Detects and displays the output voltages.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PC Health Status
CPU temperature(DTS)
System temperature
VCore
VCC12
VCC3
VCC5
: +38 C
: +30 C
: +0.82 V
: +11.95 V
: +3.25 V
: +4.92 V
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Socket specific CPU Information
CPU Configuration
Socket 0 CPU Information
CPU Speed
64-bit
Active Processor Cores
Limit CPUID Maximum
Execute Disable Bit
Intel Virtualization Technology
2001 MHz
Supported
[All]
[Disabled]
[Enabled]
[Enabled]
Active Processors Cores
Select the number of cores to enable in each processor package.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a value greater
than 3. The default is Disabled because this problem does not exist in the
Windows series operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid this problem, enable
this field to limit the return value to 3 or lesser than 3.
