Nexcom NISE 3500M Series, Руководство пользователя

Страница: 76 / 120

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
62
NISE 3500, NISE 3500M User Manual
Security
Set Setup Administrator
Password.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Password Description
If only the Administrator’s password is set, then
this only limits access to Setup and is only asked
for when entering Setup.
If only the User’s password is set, then this is
a power on password and must be entered to
boot or enter setup. In Setup the User will have
Administrator rights.
Administrator Password
User Password
Save & Exit Chipset
Advanced Main
Boot Security
→ ←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Administrator Password
Sets the administrator password.
User Password
Sets the user password.
Save & Exit
Reset the system after
saving the changes.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Options
Save Changes
Discard Changes
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
SATA: FUJITSU MHZ2080BH G2
Built-in EFI Shell
u
Reset System with ME Disable Mode
Chipset Advanced Main Boot Security Save & Exit
← →:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
<Enter>. A dialog box will appear. Confirm by selecting Yes. You can also
press <F10> to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press <Enter>. You may be prompted to confirm again before exiting. You
can also press <ESC> to exit without saving the changes.
Discard Changes
To discard the changes, select this field then press <Enter>. A dialog box
will appear. Confirm by selecting Yes to discard all changes made and
restore the previously saved settings.