November 2017
Page 24
Width: There are 4 options for bandwidth selection. 2 options (“20MHz” and “40MHz”) are
used for AP or STA client mode. 2 options (“40 plus” and “40 minus”) are used for mesh mode
Transmit Power: There are 14 options.
3.3.9 Network Settings of Wi-Fi Interface
The network settings (network parameters of Wi-Fi interface) exists in this “Interface
Configuration” section.
Clicking “General Setup” tab
ESSID/Mesh ID: (Default: “MESH_CAN2”) Network name.
All products with the same ID (or network name) and radio physical settings (802.11 protocol and
channel) are connected together automatically.
Mode: (Default: “Mesh, 802.11s”) Wireless network topology. Only mesh is supported.
For further software setup and testing examples, please refer to the User
Manual
