Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
27
NEX 980 User Manual
Chapter 3: UEFI Setup Utility
3.3.4 Storage Configuration
SATA Controller(s)
Use this item to enable or disable the SATA Controller feature.
SATA Mode Selection
Use this to select SATA mode. Configuration options: [IDE Mode], [AHCI
Mode] and [RAID Mode]. The default value is [IDE Mode].
Hard Disk S.M.A.R.T.
Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology) feature. Configuration options: [Disabled] and
[Enabled].
AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
Advanced
Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled or Disable SATA Device.
SATA Controller(s)
SATA Mode Selection
Hard Disk S.M.A.R.T
SATA3_0
SATA3_1
SATA3_2
SATA3_3
MINI_SATA1
CFAST1
[Enabled]
[IDE]
[Disabled]
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Save & Exit
H/M Monitor
Boot
Security
