background image

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

ix

NEX 614B User Manual 

Preface

Safety Precautions

1. Read these safety instructions carefully. 

2. Keep this User Manual for later reference. 

3. Disconnect the equipment from any AC outlet before cleaning or installing 

a component inside the chassis. Use a damp cloth. Do not use liquid or 
spray detergents for cleaning. 

4. To prevent electrostatic build-up, leave the board in its anti-static bag
  until you are ready to install it. 

5. For plug-in equipment, the power outlet socket must be located near the 

equipment and must be easily accessible. 

6. Keep the board away from humidity. 

7. Put the board on a stable surface. Dropping it or letting it fall may cause 

damage. 

8. Wear anti-static wrist strap.

9. Do all preparation work on a static-free surface.

10. Make sure the voltage of the power source is correct before  

 

  connecting the equipment to the power outlet. 

11. Hold the board only by its edges. Be careful not to touch any of the  

  components, contacts or connections.

12. All cautions and warnings on the board should be noted.

13. Use the correct mounting screws and do not over tighten the screws. 

14. Keep the original packaging and the anti-static bag; in case the board
 

has to be returned for repair or replacement.

Содержание NEX 614B





















































Отзывы: