Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
4
NCb-231 User Manual
Chapter 2: Camera Configuration
C
haPter
2: C
amera
C
onfIguratIon
Accessing the Camera’s Configuration
Menu (Graphical User Interface)
The camera’s default IP address is 192.168.1.168, make sure the IP address
of the computer accessing the camera is on the same network subnet
before proceeding.
You can access the camera via a web browser or NexCam Assistant
software included with the camera. The following information outlines the
instructions for each method.
Installing IP-FINDER
1. Locate the installation file
IP-FINDER-Setup.msi
on the CD.
2. Once located, double click on the file to start the installation program.
3. Click the
Next
button on the welcome screen to continue.
Next button
Note: If IP-FINDER is already installed, you can skip this section and continue
to the next section
IP-FINDER
on page 8.
