background image

USE:

USE ONLY ON LEVEL SURFACE. If chair is not stable or tips, do not use and select 

another level surface.
ALWAYS BE SURE ALL LEG SPRING PINS ARE ENGAGED THROUGH LEGS AND 

CHAIR IS LEVEL BEFORE USING CHAIR.
ALWAYS BE SURE ALL LEGS ARE CONTACTING GROUND AND SEAT IS LEVEL 

BEFORE USING CHAIR.
NEVER tip chair so feet lift off ground while seated in chair.
To avoid injuries to fingers and pinch hazards, use care when folding seat base.
To avoid injuries to fingers and pinch hazards, only adjust spring stopper knob 

when no one is seated in chair. 
Prior to every use, inspect chair for damage. DO NOT USE IF ANY DAMAGE IS 
VISIBLE OR SUSPECTED, including but not limited to cuts, frayed portions, 
corrosion, or other damage to chair.  If damage is visible or suspected, DO NOT 
USE THE PRODUCT. If there are any questions, DO NOT use the product and 
contact NEXCAM by email at [email protected]. for assistance.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SERIOUS INJURY OR 
DEATH!

Place Chair on a level surface with seat base flat on surface.  Adjust seat height as shown in setup 

instructions so seat height is at comfortable height and all legs are contacting ground.

While next to chair, adjust Spring Stopper Knob as shown in setup instructions to adjust amount of Spring 

Travel.

Chair is ready to be used.

MAINTENANCE AND STORAGE:

Do not modify this product in any way by making repairs, replacing parts, altering, 

adding or attaching anything to it except if explicitly authorized in writing by 
NEXCAM. 
Use only NEXCAM authorized replacement parts.  The use of unauthorized 
replacement parts may result in serious injury or death. 
Proper maintenance and inspection is required for this product.  
This product is used to support your weight. Never use a chair that is damaged in 

any way. Do not use if it is not wholly free of damage. If you have questions, 
contact NEXCAM by email at [email protected] for assistance.
Failure to follow these instructions can lead to serious injury or death.

Should any damage occur or to purchase NEXCAM replacement parts, contact customer service by email at 
[email protected] for assistance.

Care and maintenance is required to assure trouble free performance of your chair.
Store this product indoors in a clean, dry environment free from direct sunlight, harmful chemicals, excessive 
heat and dust.  Exposure to sunlight, excessive heat and the elements can weaken material over time. 

9

QUESTIONS? 

Email [email protected] for assistance.

Содержание AXIS RG 360











Отзывы: