Nexans N-COMFORT KT+, Руководство пользователя

Страница: 4 / 21

6 7
Loosen the knob locking screw and pull out the knob. Loosen the 4 screws in the corners and lift the cover
part off. Fix the thermostat horizontally on the wall with 2 screws through the holes in corners.
Bring in the cable through three bushings. Larger ones are for mains, setback switch and heater cables and
the smaller one for the sensor cable.
Connect the wires to the thermostat’s terminals according to the wiring diagram, see cover page (from left to
right).
1: External 230V setback (if in use), 2: Heater neutral Nout , 3: Mains neutral Nin, 4-5: NTC floor probe,
6:
Heater live
Lout
, 7: Mains live
Lin
.
Close the lid with 4 screws. Turn the potentiometer clockwise to end position and reattach the knob pointing
to MAX.
STARTUP
After connecting the power to the thermostat for the first time the parameters are initialized to default values.
Name of thermostat: RANDOM number
Mode:
Snow melting
Floor temperature min: 5°C
Floor temperature max: 35°C
Floor temperature offset (calibration): 0°C
Air temperature min: 5°C
Air temperature max:
28°C
Air temperature offset (calibration): 0°C
Snow melting ON temperature min: -15°C
Snow melting ON temperature max: 30°C
Snow melting OFF temperature: -40°C
Snow melting air humidity min:
30%
User program activated eco temp: 19°C
Externally activated eco temp: 5°C
Valve protection: OFF
Sensor type: 10k ohm
Led brightness:
70%
Weekly program: OFF
Use N-Comfort App to check and modify settings.
N-COMFORT KT+ THERMOSTAT IP65 – USER MANUAL
BASIC USE
The thermostat is controlled with a rotary knob and an optional external setback switch. The basic use of the
thermostat is simple:
• turn off the device by rotating the knob to OFF position
• turn ON and adjust the desired temperature with the knob
• use external 230VAC setback switch to activate the eco temperature (19°C by default)