
NXE400.OM_EN.2.6
12
© Copyright 2020 Nexa3D
2.
User Resources
2.1.
Software
Software required to operate NXE400 may be found at
nexa3d.com/downloads
.
MagicsPrint for Nexa3d
with .bpprof file of parameter settings and
NexaX
with .nxr file with
parameter settings are both required for file preparation.
2.2.
Instructions For Use
Usage instructions and training may be found at the Nexa3d service center,
nexa3d.atlassian.net/servicedesk/customer/portal/2
Prior to scheduling installation, review and sign the site preparation requirements.
2.3.
Unboxing & Setup
No tools are needed to unpack the NXE400. If the printer will be relocated, remove all resin,
secure the z-stage and use original packaging.
Unlatch the front panel/ramp and place
as shown in the picture. Line up the holes
and place bolts (found in a plastic bag
inside the crate) to secure the ramp
before unloading.