Programming
1.
Connect a bulb to the receiver
2.
Place the receiver in the wall socket
3.
The LED on the receiver will now flash for 5 seconds while the receiver is
in learning
mode.
4.
Press the ON button on the remote control with which you want to control the
receiver. The connected bulb will flash twice to confirm that learning has been
successful.
Once programming has finished, all functions will work automatically.
Note:
The LED will stop flashing and return to its original state if a button press is not registered
during the 5 seconds that the receiver is in learning mode.
If the connected
bulb does not confirm by flashing twice after pressing the button, it will
mean the receiver memory is full and must be emptied before a new transmitter is added. (See
next page)
1.
2.
4.
