7. Screw back the battery compartment cover (fig. 8).
8. Assemble back the stand/hanging hook (fig. 9).
9. Set brightness (darkness) level for the time being LBST-604 to switch
“ON” receiver.
Two alternatives:
1). Choose the ex-factory pre-set brightness level 10 lux.
Press START button for 1 second (fig. 10) and release hand from it. Within 20 seconds after hand release from the START
button, place LBST-604 to where it stays for operation and leave it in case not to affect its brightness detection of the
environment. After the 20 seconds, receiver connected lamp will blink twice to confirm the setting.
2). Set up brightness level at actual environment situation.
Press START button and hold for 3 seconds (fig.10), LED starts to blink and release hand from the START button. Within 20
seconds after hand release from the START button, place LBST-604 to where it stays for operation and leave it in case not to
affect its brightness detection of the environment. After the 20 seconds, receiver connected lamp will blink twice to confirm the
setting.
10. Two ways of LBST-604 staying: stand on the table or hang on the wall (fig. 11).
