Newworld Vision 100E, Руководство пользователя и инструкция по установке, Страница: 10 / 17

INSTALLATION INSTRUCTIONS RANGE ELECTRIC
Moving the cooker
Take care if the appliance needs to be
lifted during installation - always use an
appropriate method of lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open the
door and grasp the frame of the cooker,
taking care that the door does not shut on
your fingers.
Take care to avoid damage to soft or
uneven floor coverings when moving the
appliance. Some cushioned vinyl floor
coverings may not be designed to
withstand sliding appliances without
marking or damage.
Important: Ensure that you route all
mains cables well clear of any adjacent
heat source.
Clearances
This cooker may be fitted flush to the
base units of your kitchen.
• No shelf, overhang, cupboard, or
cooker hood should be less than
650mm above the hob top, but
please check this with the hood
manufacturers instructions.
• If your appliance has a side opening
door, we recommend a side clearance
of 60mm to allow the oven door to
fully open.
• The cooker must have a side clear-
ance above hob level of 90mm up to
a height of 400mm.
The important dimensions are those
around the appliance.
For all appliance size:
900 mm
1000 mm
Flush fit to
base units
Flush fit to
base units
90
mm
90
mm
650 mm
minimum
450 mm
clearance