Newworld NWLS50TEB, Инструкция по эксплуатации

Страница: 20 / 27

Looking after your appliance
 Disconnect the oven from the power supply at the fuse-box by means of the switch used to connect the
appliance to the electrical mains ;or unplug the appliance
.

Remove the glass cover of the lamp-holder by rotating anti-clockwise .
 Remove the lamp and replace with a lamp resistant to high temperatures
(300
℃ ) with the following characteristics:
temperatures (300 ℃ )with the following characteristics:
Voltage: 220-240V
Wattage: 25W
Type: E 14
Replace the glass cover. Reconnect the appliance to the mains power supply.
Cleaning the oven door / How to remove the oven doors
For a more thorough clean, you can remove and disassemble the oven door. Proceed as follows:
Oven door removal and assemble procedure:
Fig.1
Fig.2
Fig.3
Fig.4
2 0
- Open the lever A completely on the left and right hinges (fig.2) .
- O pen the door to the full extent (fig.1)
- Hold the door as shown in (fig.3).
- Gently close the door (fig.3) until left and right hinge levers A are hooked to part B of the door (fig.4).
- Withdraw the hinge hooks from their location following arrow C ( fig.4).
- Rest the door on a soft surface.
- To replace the door, repeat the above steps in reverse.