Newworld NWLS50SEB, Инструкция по эксплуатации

Страница: 9 / 27

Figure 1.
9
Installing your Freestanding Cooker
Bringing it all together
Installation requirements
THIS COOKER MUST BE INSTALLED BY A
QUALIFIED INSTALLER IN ACCORDANCE WITH
LOCAL REGULATIONS
IM IMPORTANT: CONTACT AN AUTHORISED
SERVICE AGENT FOR INSTALLATION OF YOUR
FREESTANDING COOKER !
Positioning
1. Make sure that there are no combustible or
flammable materials, such as curtains, in the
vicinity of the installation.
2.Furniture and cabinets surrounding the
cooker must be of material resistant to
temperatures greater than 100°C.
3.Surrounding furniture, cabinets and
extractor fans should be positioned in
accordance with the diagram shown in
the figure
4.There must be at least 2cm of free space
between the back wall and the rear of the
appliance to allow for ventilation and air
circulation.
5.If fitted, the extractor fan must be at least
65cm above the hotplates. If no fan is fitted
the minimum distance between the
hotplates and any cabinet or other structure
must be 75cm.
First Use
IMPORTANT: When using your oven for the first time your
cooker may give off an unusual odour from the heating
elements and insulation materials. This is normal for new
cookers. To eliminate this odour run the oven at 250
degrees for 40-60 mins with the oven empty.
Unpacking
Carefully unpack and examine the appliance for any
damage. If you think there is a defect, do not use the
appliance and contact Product Support on
0333 305 2263.