Newworld NWCFD418, Инструкция по эксплуатации, Страница: 13 / 25

1 3
4. LECO
When the refrigerator is powered on, the LECO net flavor function will run
automatically on a regular basis, lasting for 20 minutes each time; the LECO system
decomposes odors and microorganisms into CO2 and H2O. At the same time, the
LECO system releases free radicals to actively eliminate bacteria, creating a cleaner
cooling space.
- Enabling the LECO function manually
Press the Function key to select LECO until the icon of LECO flickers, and then press the
OK/Lock key for confirmation. If the OK/Lock key is not pressed within 5 seconds, the
current setting will be invalidated.
-
Exiting of the LECO function
The LECO function exits automatically 20 minutes after it is enabled.
Disabling the LECO function manually: Press the Function key to select LECO until the
corresponding icon flickers, and then press the OK/Lock key to validate the setting.
2. Freezer temperature setting
Press the Temp. Zone key to select the Freezer zone until the corresponding icon flickers,
then press the Temp. key to set the temperature as desire. Press the OK key or wait for 5
seconds to validate the setting.
The freezer temperature setting cycles are as following:
- 18
>
-17
>
-16
>
-24
>
-23
>
-22
>
-21
>
-20
>
-19
>
-18
3. Holiday
When the Holiday function is enabled, the freezer temperature will be controlled at 14 ℃ .
• When you are out for a long time, you can set the Holiday function to keep the
refrigerator running with low energy consumption, while ensuring the fresh food
compartment is free from undesirable smells and the freezer compartment operates
normally.
Be sure to take out all foods from the fresh food compartment before setting this function.
Under the Holiday mode, the fridge temperature is subject to no change.
• Enabling the Holiday function
Press the Function key to select Holiday until the corresponding icon flickers, and then
press the OK/Lock key within 5 seconds for confirmation. If the OK/Lock is not pressed
within 5 seconds, the setting will be invalidated.
• Exiting the Holiday function
Under the Holiday mode, press the Function key to select Holiday until the corresponding
icon flickers, and then press the OK/Lock key for confirmation. The Holiday function will
then be exited.
When the Smart function is enabled, the Holiday function will be disabled automatically.