Newworld LOMOND100DFCRM, Инструкция по эксплуатации

Страница: 21 / 37

20
Using your Freestanding Cooker
Getting the most from your appliance
Programmable Timer
This model has a digital display, 24hr clock with 3
control buttons. When the power is connected,
the screen displays ‘AUTO’.
Adjusting the digital clock
For first use of cooker, the time must be set by
using the digital timer. The time must be set every
time the cooker has been reset by the mains. To
set the correct time, press the button to
remove 'AUTO' first, then + or - button to
advance forward or backward until the correct
time is displayed.
Manual operation setting
If ‘AUTO’ is flashing, automatic or semi-automatic
program has been set. Press
button, ‘AUTO’
will clear from the display and the oven can be
operated manually.
Automatic setting
Automatic setting of the oven allows you to
select the end time, cooking time, temperature
and cooking mode. The oven will switch on,
cook according to the selected cooking mode
and temperature and then switch off
automatically
;
1. Press the function button repeatedly until the bar
above flashes , then press + or – button to set the time
frame for baking.
2.
Press the function button repeatedly until the bar
above flashes , then press + or – button to set the time
to switch off.
3.
Set cooking temperature and cooking mode by
turning the thermostat knob and selector knob.
After these setting , the bars above and will flash,
indicating that automatic cooking feature of the oven is set.
As an example: If cooking time takes 45 minutes
and you want it to finish at 14:00
1. Press the function button repeatedly until the
bar above flashes and set the cooking time 45
minutes.
2.
Press the function button repeatedly until the
bar above flashes and set the finish time to 14:00.
After the above setting , the current time is displayed
and the bars above and will flash, indicating that
automatic cooking feature of the oven is set. When
the clock displays 13:15, the oven will start cooking
automatically.
While cooking the bar will flash.