Newwave FlowerPot, Инструкция по эксплуатации

Страница: 9 / 11

USING THE PID CONTROLLER
Now that you have assembled your FlowerPot, let’s get you up and running.
1. Make sure your FlowerPot is safely
mounted on the safety stand or your
glass rig. The rear red switch powers
the PID.
2. This is what it looks like when
turned on. It will read the current
temperature of the coil, in this case,
the coil is at ambient temperature.
3. Use the or buttons to set
your desired temperature.
4. When ready, push the front power
button. This will power the coil and it
will start to heat. Give it 3 to 5 min-
utes to reach and settle in on your
desired temperature.