Newton QuickTake 200 Camera, Начало работы

Страница: 25 / 98

Viewing nine images in Erase mode
1 Set the mode dial to Erase (
#
).
2 Press the action button to select
ERASE FRAME
.
3 Press the + and – buttons at the same time.
Nine images appear on your LCD screen.
4 Press the + and – buttons to select a frame.
5 Press the action button again to erase the frame.
OK?
flashes on your screen, giving you a chance to verify that you want to
erase the image.
6 Press the action button a third time to erase the image.
7 To revert to single-frame playback, press the + and – buttons at the same time again.
A single image appears on your LCD screen.
Protect mode
Use Protect (
3
) mode to assign read-only, protected status to an image to
prevent it from being erased.
IMPORTANT
Even protected, read-only images are erased when the storage
card is formatted. (See Chapter 1 for more information about formatting
the card.)
1 Set the mode dial to Protect (
3
).
2 Press the plus + or minus – button to select the frame that you want to protect.
3 Press the action button.
The image is now protected and cannot be erased. The protection icon
appears next to the image number on your LCD screen when you view
this image.
25
Using the Camera to Take Pictures