4
For more information, visit us online www.newtonwaterproofing.co.uk
INTRODUCTION, FEATURES, ENCLOSURE & CONNECTIONS
PANEL HIGHLIGHTS & CONNECTIONS
pumping system comprises of a Control Panel, Probe Set and a single
puddle pump. The panel is simple to install and is enclosed in an IP55 rated casing.
The panel has one power supply input which should be connected to a 230V power supply.
The Newton SP1 Panel features interfaces for use with the optional
as well as connections to whole house alarm and monitoring systems.
The control panel uses a probe set that monitors the water level and informs the panel of:
• High water level - Pump is started
• Low water level - Pump is stopped
• Alarm level - Panel Alarm sounds
A typical system is shown below:
*
There is only one 230 VAC power supply. Connection is either directly from mains AC or from Inverter AC.
ENCLOSURE
The Newton NP400LLPS panel is housed in 225 mm wide x 145 mm deep x 315 mm high ABS plastic enclosure
with 6 knockouts for fitting plastic cable glands, ready for the following cables:
Main power, 1 x Probe Set, 1 x pumps and 1 x Dialer or BMS. 2 knockouts will not be used. If optional Alarm is
fitted, use one of the two spare knockouts.
Parts:
• 1 x Panel
• 1 x NP400PP Puddle Pump
• 1 x Probe Set
The enclosure is fixed to the wall using fixings that are suitable for the weight of the unit and your wall type. The
face plate is attached to the back box with the supplied screws. A ribbon cable connects the face plate display to
the main PCB.
Newton
SP1
Panel
Probe
Set
Pump
Dialer
PA5 - (Option)
BMS
(Option)
Power
Inverter
(Option)*
Grid mains
power supply
230V AC 13A*
Battery
Battery
OPTIONAL
FURTHER
BATTERIES
Alarm
(Option)
