NewTek NDIHX-PTZ2, Руководство по эксплуатации

Страница: 15 / 44

Page | 11
2.3.1
INSTALL IN 5 SIMPLE STEPS
Step 1
Take the hood sheet and remove the
double-sided tape from one end using the tab.
Step 2
Bend the hood, bringing together the ends and
inserting the smaller end into the slot to the left
of the adhesive area. Once inserted, press firmly
to ensure the adhesive sticks.
Step 3
To attach the hood, align the notch in the hood
to where the upper and lower lens cover meet.
Push the hood onto the camera as shown.
Step 4
Align the bottom edge of the hood to the front of the lens and then move to the top position. Here,
align the bottom edge of the hood to the front of the lens and confirm the alignment by looking at the
camera from the side.
FIGURE 20
FIGURE 21
FIGURE 22
FIGURE 23