Newport Spectra-Physics ST-200, Руководство пользователя

Страница: 34 / 36

34 Maintenance and Service
Figure 24 Fuse Replacement
WARNING
To reduce the risk of electric shock or damage to the instrument,
turn the power switch off and disconnect the power cord before
replacing a fuse.
If a fuse blows:
1. Disconnect the power cord from the controller
2. Pry out the fuse cover and remove the fuse holders.
3. Replace the fuse(s).
Use only 5 * 20mm time lag fuses as indicated below
Fuse Replacement 1.25Amp, (T), 250V
4. Reconnect the power cord and turn on the instrument.
5. If the problem persists, contact Newport Corporation for service.
6.3 Obtaining Service
The Smart Table Controller contains no user serviceable parts. To obtain
information regarding factory service, contact Newport Corporation or your
Newport representative. Please have the following information available:
1. Instrument model number (on the rear panel)
2. Instrument serial number (on rear panel)
3. Description of the problem.
If the instrument is to be returned to Newport Corporation, you will be given
a Return Number, which you should reference in your shipping documents.
Please fill out a copy of the service form, located on the following page, and
have the information ready when contacting Newport Corporation. Return
the completed service form with the instrument.