90074225 MOPS-Q QTH Lamp Pow er Supplies
Page 11
3 SYSTEM SETUP
3.1 ITEMS INCLUDED WITH SYSTEM
Oriel Instruments provides lamp interconnection cables with the lamp housing. The power supply
includes the following items:
▪
Power Supply
▪
Power Cord
▪
Us
er’s manual
3.2 UNPACKING
Remove all items from the shipping containers and verify each item is accounted for. The system is
carefully packaged to minimize the possibility of damage during shipment. Inspect the shipping boxes for
external signs of damage or mishandling. Inspect the contents for damage.
If any item is missing or damaged, immediately contact Oriel Instruments or the Newport representative
from whom the system was purchased. It is suggested to save the packaging material and shipping
container, in case the equipment needs to be relocated at a future date.
When handling this power supply, hold it from underneath the hous ing. Never use any knobs, buttons or
cables to carry or locate the power supply.
WARNING
Do not attempt to operate this equipment if there is evidence of shipping
damage or there is suspicion that the equipment will not operate
correctly. Damaged equipment may present hazards.
3.3 CHOOSING A LOCATION
Choose an installation location where the power requirements can be met for the system. Be sure power
is not applied to the system until the setup has been completed.
The environment should be that of a typical laboratory atmosphere, without excessive humidity and
contaminants in the air. Do not allow the ventilation holes on the power supply to be blocked. Air should
be able to circulate freely around the unit.
Once the connections have been made to the back of the power supply, the unit can be operated by
using the controls located on the front panel. Ensure that the final location allows for ease of access to all
front panel functions.
