Newport L Series, Руководство пользователя

Страница: 7 / 19

7
5 First Time Running
1. Place Electric Outboard onto the back of the vessel in the Stow
away position.
2. Loosely tighten the Transom Mounting Screws until they grip the
Transom Mount.
3. Press the Tilt Lever and slowly let the motor enter the water.
4. Use the Depth Adjuster Collar to adjust the height of motor. Recom-
mended running depth is between 6in to 12in (15cm to 30cm) below
the waterline.
5. When you are satisfied that the motor is at a safe depth, and isn’t
too close, or in danger of hitting the bottom of the water way, you
may proceed to tighten the Transom Mounting Screws.
6. Once this is done it should be safe to connect the battery to the
motor. Ensure that the twist grip is in the neutral position and that
the nuts are tight on the terminals to prevent a poor connection.
7. Select the desired speed and direction using the twist grip on the
tiller arm.
8. Do not go from full forward speed to full reverse speed without let-
ting the propeller stop turning first or motor damage may occur.