Newport 1936-R series, Руководство для стартапов

Страница: 6 / 18

2 Start Up Guide

To avoid fire hazard, use only the specified fuse(s) with the correct type
number, voltage and current ratings as referenced in the appropriate
locations in the service instructions or on the equipment. Only qualified
service personnel should replace fuses.

To avoid explosion, do not operate this equipment in an explosive
atmosphere.

Qualified service personnel should perform safety checks after any
service.
1.3 General Cautions
Observe these cautions when operating or servicing this equipment:

Before applying power, carefully read the warning label placed over the
AC power input receptacle in back of the instrument.
Figure 1 AC Receptacle Warning Label

If this equipment is used in a manner not specified in this manual, the
protection provided by this equipment may be impaired.

To prevent damage to equipment when replacing fuses, locate and
correct the problem that caused the fuse to blow before re-applying
power.

Do not block ventilation openings.

Do not position this product in such a manner that would make it
difficult to disconnect the power cord.

Use only the specified replacement parts.

Follow precautions for static sensitive devices when handling this
equipment.

This product should only be powered as described in the manual.

There are no user-serviceable parts inside the 1936-R/2936-R Series
Optical Power Meters.

To prevent damage to the equipment, read the instructions in the
equipment manual for proper input voltage.

Adhere to good laser safety practices when using this equipment.