Correct Fluid Level
Preventing Corrosion
Newmar sprays the battery connections once they are tightened with a battery protector and sealer to help prevent
corrosion. When performing battery maintenance, you should reseal the battery terminal connections. The following
measures may also prevent future corrosion:
• Use a small bead of silicone sealer at the base of the post where it meets the battery case.
Place a felt
battery
washer
over the post and into the bead of silicone.
• Coat the washer with high temperature grease or petroleum jelly (Vaseline), then place the cable on the post and
tighten.
• Coat the exposed cable end with the grease. The gas condensation on metal parts of the battery cause most
corrosion issues.
Cord Reels
Cord reels provide the ease and convenience of storing the shore power electrical cord in a neat and compact space
with the assistance of motorized retraction.
Operating Instructions
Pull out the power cord and plug into the appropriately
rated electrical outlet. Make sure the power source is providing
the
correct voltage before plugging in the shore cord.
To store, disconnect the cord
from the power source outlet. Remove the cord from the
pocket in the compartment, and press and hold
the
momentary switch to retract and
roll
up the power cord as needed.
For More Information
Refer to the product manufacturer's owner's manual and links to learn more about your coach's cord reel.
© 2016 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.