NewMar Kountry Star 2022, Руководство пользователя

Страница: 77 / 202

© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
72
ELECTRICAL
Lighting Operation via KIB Backlit Multiplex Switch
This article provides brief operating instructions for KIB backlit multiplex switches.
Operation
The KIB multiplex switch panel controls the lights,
water pump, floor heat, and fans when wired to the
corresponding switch label. The switch panels will vary
by coach model and floorplan.
Press the switch labeled with the circuit you wish to
operate. The green LED indicator will illuminate on
the KIB switch panel when the circuit is activated.
Pressing the switch again will turn the circuit off and the
indicator will change to blue when it is turned off.
Buttons and Functions
Some of the buttons and functions displayed on the KIB
multiplex switch panels include, but are not limited to:
CEILING, KIT/LRM, DRESSER, ACCENT, HI/LOW, WALL,
RH RD, LH RD, W. PUMP, DINETTE, SEATING, KIT OVH,
BKLTG, VANITY.
Testing The GFCI Outlets
The GFCI outlets should be tested at least once a month.
The reset button needs to be pressed before starting the
test.
1. The GFCI outlet must be supplied with 120V power
for testing and general use.
2. Pressing the Test button on the GFCI outlet will trip
and cease to supply power to the outlets on the
GFCI, as well as any other outlets that are hooked up
downstream of the GFCI outlet.
3. Pressing the Reset button will reset the GFCI outlet
and all outlets downstream of the outlet. Some GFCI
outlets may have a LED light as a visual indicator of
the power status.
This article provides an overview of the purpose and function of a GFCI outlet.
Ground Fault Circuit Interrupt Outlets (GFCI)
The Ground Fault Circuit Interrupt (GFCI)
outlets protect the user from ground
faults between a hot wire and ground.
The 120 Volt electrical outlets in the
kitchen and bath area are GFCI protected
receptacles. The electrical outlets located
in the slideouts are wired through the
kitchen GFCI.
The exterior electrical outlets are wired
through the bathroom GFCI. On units
equipped with the floor heat option, a separate GFCI is
installed in the bathroom or near the main breaker box.
Units with the holding tank heat pad option will have an
additional GFCI located in the basement area; however,
the exact location varies.
Do not use an adapter, cheater, or extension cord
that breaks the continuity of the ground circuit to the
ground pin. Never remove the ground pin from a plug
in order to connect it to a two-pronged ungrounded
outlet.
IMPORTANT
!
This article provides information about the 120 Volt outlets located throughout the interior of the coach.
120 Volt Outlets
Several 120 volt receptacles are located
throughout the interior of the unit. These
receptacles require three-pin plugs that
provide proper grounding to protect you
from electrical shock. The breaker for the
outlets are usually located in the breaker
box. If the breakers are on the inverted
circuitry, they will be located in the
subpanel near the main breaker box.
Newmar coaches are framed 16 inches on center, allowing the best placement of outlets, switches and other
components.
Receptacles and Accessory Chargers