NewMar Centurion CR48-10 Скачать руководство пользователя страница 4

P.O. Box 1306, Newport Beach, California 92663  •  Phone: 714-751-0488  •  Fax: 714-957-1621  •  E-Mail: [email protected]

www.newmartelecom.com

4

IX) Specifications

Centurion Rectifiers

Input Voltage/Frequency: 

90-264 VAC* / 47-63 Hz.

Input Amperage: 

6 amps @ 115V and full load, 3 

amps @ 230V and full load

Power Factor: 

.96-.99

Output Voltage/Amperage*:

CR48-10

: -54.4 VDC, 10 amps continuous

CR24-20

: +27.2 VDC, 20 amps continuous

* 100 % output power available from 105 VAC to 264 

VAC; Derate output linearly from 100% @ 105 VAC to 

80 % @ 90 VAC

Line/Load

Regulation: 

+/- 2 %

Ripple:  

CR24-20: 1% PK-PK

 

CR48-10: 1% PK-PK

Protection: 

Over-voltage, current limiting, over-

temperature, input and output fuses.

Fan Operation: 

Continuous air flow front to rear.

Indicators/Controls:

• Output power indicators LED 

• Power switch

Operating Temperature: 

-10°C to +60°C; 100 % load 

from 0°C to +50°C; Derate linearly to 80% load from 

+50°C to +60°C and 0°C to -10°C.

Weight: 

6.0 lbs.

Safety:

• EN55022 Class A

• UL 1950

• CE mark

Centurion Rectifier Shelf

Model CRS
Input:

 115/230 VAC nominal 

Capacity:

 

Up to Three Rectifiers, CR24-20 or CR48-10

Alarms/Indicators/Controls:

• Output failure contacts; Form A, Form B, 

  Form C, Contact rating: 1 Amp Max.

• Front panel LED indications: Minor Alarm, 

  Major Alarm, Output OK, Battery Over Temp

• Front panel voltage test points and adjustment 

   Adjustment Range: 24V: 25-29.4V,  48V: 50-59V

Battery Drain (with no AC input):

 <200 mA 3 rectifiers 

and controller

Mounting:

 19" or 23" rack

Dimensions: 

Refer to Dimensional Drawings

Weight: 

10 lbs.

Safety: 

UL 1950 compliant

Rectifier

A

Rectifier

B

Rectifier

C

X) Dimensional Drawings

Содержание Centurion CR48-10

Страница 1: ... Input C DC Output Battery Connection Points Rectifier Installation Operation III A Installation B Rectifier Module Output Indications Shelf Controller And Rectifier Operation Adjustment IV A Start Up B Output Voltage Adjustment C Controller Indications Alarm Contacts V A Minor B Major Output OK C Alarm Connector Wire Assembly Battery Charging VI Removing and Installing the Controller Assembly VII Sy...

Страница 2: ...ided Feed the AC cable thru the strain relief and then attach AC wires to the input terminal block TB1 as shown in figure 1 For line to neutral sources connect Hot Line to AC L1 Neutral to ACC L2 A chassis mounted 10 32 stud is provided for earth grounding CAUTION 230V AC applications only 230V AC sources should be protected by a double pole circuit breaker After wiring is completed securely tighte...

Страница 3: ... be accomplished as specified in section IVB Automatic Temperature Compensation Option via use of a temperature compensation sensor Model TP TEMP 445 4129 0 output voltage to batteries will automatically be adjusted based on sensed temperatures as listed in table below CR24 20 0 06V C CR48 10 0 12V C The temperature probe installs at the rear of the shelf in the port labeled J3 and the sensor shoul...

Страница 4: ...ntinuous air flow front to rear Indicators Controls Output power indicators LED Power switch Operating Temperature 10 C to 60 C 100 load from 0 C to 50 C Derate linearly to 80 load from 50 C to 60 C and 0 C to 10 C Weight 6 0 lbs Safety EN55022 Class A UL 1950 CE mark Centurion Rectifier Shelf Model CRS Input 115 230 VAC nominal Capacity Up to Three Rectifiers CR24 20 or CR48 10 Alarms Indicators Con...

Отзывы: