Newman Bela VISTA, Инструкция по установке и эксплуатации

Страница: 5 / 24

CO emission (13% O
2
): 0.68% (wood) 0.08% (smokeless fuel)
Flue gas temperature: 322
0
C (wood) 331
0
C (smokeless fuel)
Operational mode: Intermittent
Technical data according to EN 13240+A2:2004.
(Vista Panoramica, Vista Quente).
Nominal heat output: 4.9kw (wood) 4.9kw (smokeless fuel)
Flue gas mass flow: 3.4 g/sec (wood) 3.4 g/sec (smokeless fuel)
Recommended chimney draught: 12 Pa
Efficiency: 82.1% (wood) 74.9% (smokeless fuel)
CO emission (13% O
2
): 0.40% (wood) 0.33% (smokeless fuel)
Flue gas temperature: 244
0
C (wood) 261
0
C (smokeless fuel)
Operational mode: Intermittent
2.0 Installation
2.1 Unpacking the stove
After removing the outer packaging, unbolt the combustion chamber from the wooden pallet and place
it gently on its back. The cardboard packaging can be placed underneath to prevent marring. Remove
the leg pack from the stove and bolt each leg securely to the underside of the base on the combustion
chamber, using the bolts provided (found inside the stove). Note: There are lower bolts supplied for
fitment into holes in the base of each leg, these are adjustable to allow level adjustment of stove to
uneven surfaces.
We recommend that two people perform the assembly and installation procedure.
2.2 Installing this stove
The stove and chimney installations MUST comply with all current National and Local Building
Regulations and any rules in force including current issues of British Standard BS 8303 code of
practice for installation of domestic heating and cooking appliances burning solid mineral fuel and
British Standards BS EN 15287-1:2007 design, installation and commissioning of chimneys; your
approved dealer or your local building control officer can advise regarding this. Ultimately, it is you