3
Do not install the product in high temperature environments.
● Do not install the product near a heat source, such as a radiator, a heat reservoir,
a stove or other heating products.
● Do not expose the product to direct sunlight, which may cause high temperatures
and subsequent faults in the product.
For transport.
● Pack the product for transport or maintenance by using the cartons and cushioning
material provided with the product.
● Before you move the product, disconnect all external connections and separate all
toppling preventing products. Move the product carefully to prevent it from being
hit or squeezed.
Do not cover or block up any vents on the product.
● Any overheated components may cause fire, damage the product, and shorten
the service life.
● Do not lay the product down where the venting surface will be covered.
● Do not install the product on a carpet or cloth.
● Do not use a cloth such as table cloth to cover the product.
Do not damage the power cable.
● Do not damage, change, twist, bend, or forcibly drag the power cable or AC adapter.
● Do not put weights (such as the product itself) on the power cable or AC adapter.
● Do not forcibly drag the cable when you pull out the power plug or AC adapter. If
the power cable or AC adapter is damaged, please contact the local distributor to
repair or replace it.
The power cable or AC adapter in the accessory box is for this product only. Do not
use it on other products.
Keep away from the product when you use a radio.
The product complies with the international EMI standard to prevent radio
interference. However, interference may still exist and causes noise in the radio. If
noise occurs in the radio, try the following solutions.
● Adjust the direction of the radio antenna to avoid the interference from the
product.
● Keep the radio away from the product.
CAUTION
