NewLine Chromebox A10, Руководство пользователя

Страница: 20 / 24

The design of external power switch is a screw-less type spring
clamp pluggable terminal block, you can insert a wire by press the button
on the terminal, please refer to the procedure below.
Step 1 Please prepare a pin or rod that hard enough for pushing the
button on the terminal block
Step 2 Push the button in the end and hold it
Step 3 Insert the wire into the hole and make sure the stripped portion is
fully inserted
Step 4
Release the pin or rod then the wire will clamp by the terminal block
Step1 Step2 Step3 Step4
19