Newland NLS-HR32 Series, Руководство пользователя

Страница: 233 / 300

Enter Setup
217 ** Exit Setup
Example: Program a Format_0 data format using formatter command type 6, Code 128 containing 10 characters
applicable, send all characters followed by “A”.
1. Scan the Enter Setup barcode Enter the Setup mode
2. Scan the Add Data Format barcode Add a data format
3. Scan the 0 barcode Select Format_0 as the label
4. Scan the 6 barcode Select formatter command type 6
5. Scan the 9 barcode three times All interface types applicable
6. Scan the barcodes 002 Only Code 128 applicable
7. Scan the barcodes 0010 Only a length of 10 characters applicable
8. Scan the alphanumeric barcodes F141 Send all characters followed by “A” (HEX: 41)
9. Scan the Save barcode Save the data format
To streamline the programming process, you may as well generate a batch barcode by inputting the command (e.g.
@DFMADD069990020010F141; ) used to create a data format. See the “Use Batch Barcode” section in Chapter 10 to
learn how to put a batch barcode into use.
When creating multiple data formats sharing a label, the formats are separated from each other by a vertical bar (|) in the
batch command, e.g. @DFMADD069990029999F141|069990039999F142|169990049999F143; .