Newland NLS-HR15, Руководство пользователя

Страница: 29 / 300

13
Pairing the Scanner to a Cradle
Before configuring or using the scanner, you must pair it to a cradle first. A cradle can pair with up to seven scanners if
Multipoint-to-Point mode is enabled.
You need to perform the pairing operation manually: After the scanner and cradle are turned on, insert the scanner in the
cradle and then press the Pair button on the cradle. The scanner beeps on a successful pairing.
To unpair them, you may pair the scanner to another cradle, or scan the Clear Pairing Info on Cradle or Clear Pairing
Info on Scanner barcode in Chapter 4.
Searching Paired Scanner(s)
After the scanner(s) and cradle are turned on, press the Pair button on the cradle and the paired scanner(s) will beep.
Wireless Communications
The scanner can communicate with a remote host using Bluetooth, or by pairing with a CD52 cradle that supports the
following interefaces:

Standard RS-232 connection to a host. For the cable connection ins
tructions, see the “Using RS-232 Cable” section
in this chapter. To learn how to configure RS-232 communication parameters, see Chapter 5.

U
SB connection to a host. For the cable connection instructions, see the “Using USB Cable” section in this chapter.
To learn how to configure USB communication parameters, see Chapter 6.
For wireless communication parameters, see Chapter 4.