Newland NLS-HR100, Быстрый старт

Страница: 17 / 61

E-13
Programming Code
Code Programming ON
Code Programming OFF
Reading Mode
Hand-held Mode
：
Factory Default, scan engine will begin 1
、
to scan when triggered. And when it scans successfully or the trig-
ger is released, the engine will stop scanning.
Sensor Mode
：
After programming, the engine will start to 2
、
sense the environment without trigger. After a scan, it will stop and
keep sensing to wait another illumination changing. In sesor mode,
a trigger also can start a scan. The sensitivity level could be chosen.
Auto Mode
：
First program the engine, then trigger it, the 3
、
engine will start to scan. After a scan, the engine will not stop but
start a new one automatically until another trigger. By default, the
engine will not repeat reading a same barcode.
Hand-held Mode
(Factory Default)
Sensor Mode
Auto Mode