Newland NLS-FM3051-2X, Руководство пользователя

Страница: 174 / 188

160
Appendix 5: Parameter Programming Examples
The following examples show you how to program parameters by scanning programming barcodes.
a. Program the Decode Session Timeout
Example: Set the decode session timeout to 1500ms
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode from the
“Decode Session Timeout” section in Chapter
3.
3. Scan the numeric barcodes
“1”, “5”, “0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
b. Program the Image Stabilization Timeout
Example: Set the image stabilization timeout to 500ms
1. Scan the Enter Setup barcode.
2. Scan the Image Stabilization Timeout barcode from the
“Image Stabilization Timeout” section in
Chapter 3.
3. Scan the numeric barcodes
“5”, “0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
c. Program the Timeout between Decodes (Same Barcode)
Example: Set the timeout between decodes (same barcode) to 1000ms
1. Scan the Enter Setup barcode.
2. Scan the Timeout between Decodes (Same Barcode) barcode from the
“Timeout between
Decodes (Same Barcode)
” section in Chapter 3.
3. Scan the numeric barcodes
“1”, “0”, “0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)