Newland EM2039 Series Скачать руководство пользователя страница 2

Страница: 2 / 31

Disclaimer

Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you

should keep this manual for future reference.

Do not disassemble the device or remove the seal label from the device. Otherwise, FuJian Newland Auto-ID Tech. Co., Ltd.

does not assume responsibility for the warranty or replacement.

All pictures in this manual are for reference only and actual product may differ. Regarding to the product modification and

update, FuJian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any software or product to improve

reliability, function, or design at any time without notice. Besides, the information contained herein is subject to change without

prior notice.

The products depicted in this manual may include software copyrighted by FuJian Newland Auto-ID Tech. Co., Ltd or a third

party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify, decompile, disassemble,

decode, reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders.

This manual is copyrighted. No part of this publication may be reproduced or used in any form without written permission from

Newland.

FuJian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.

Содержание EM2039 Series
































Результаты поиска

Содержание EM2039 Series

Отзывы:

Похожие инструкции для EM2039 Series

Бренды по названию

Популярные бренды

Newland EM2039 Series, Руководство по интеграции

Результаты поиска

Содержание EM2039 Series

Отзывы:

Похожие инструкции для EM2039 Series

Бренды по названию

Популярные бренды