Newland BS8050-2V Piranha, Руководство пользователя

Страница: 20 / 52

14
Sound Notifications
Turn sound notifications on or off by scanning the appropriate barcode below. After this feature is enabled,
the scanner beeps when one of the following events occurs:
1. The scanner is turned on.
2. The scanner resets.
3. A barcode is decoded (including good read for removing barcode data from the FLASH memory in the
Batch mode).
4. The scanner switched to the Real-Time mode or Batch mode.
5. Transmitting data via Bluetooth failed.
6. iOS soft keyboard is turned on or off.
7. Batch data transmission via USB starts.
8. Batch data transmission via USB is interrupted.
9. Batch data transmission via USB is completed.
10. The paired Bluetooth device is unpaired from the scanner.
11. The scanner is turned off.
12. USB connection between the scanner and the host established.
13. USB connection between the scanner and the host lost.
14. Bluetooth connection between the scanner and the host established or lost.
Sound Notifications On (default)
Sound Notifications Off