※ Be sure to observe following warning / cautions and those provided in the text.
In order to secure safety in handing the instrument.
WARNING
General
‣
In order to prevent electric shock, be sure to disconnected this
instrument from the main power source when wiring.
Protective
Grounding
‣
In order to prevent electric shock ; be sure to provided protective
grounding prior to turning on this instrument.
Do not cut a protective grounding conductor disconnected
protective grounding.
Power
Source
‣
Make sure that the supply voltage for this instrument conforms to
the voltage source.
‣
Attach protective cover prior to turning on this instrument.
Fuse
‣
In order to prevent a fire, use only our specified fuse.
‣
Don't short-circuit a fuse.
Working
Environment
‣
Do not operate this instrument in the environment where it is
exposed to a combustible, explosive, corrosive gas or water, steam.
Input and
Output
wiring
‣
Provide input and output wiring after turning off the power.
CAUTION
Inside of
instrument
‣
Do not disassemble the inside of the instrument.
‣
Prevent inflow of dust, water, oil and wiring dregs in to the
instrument.
Input and
Output wiring
‣
Do not use empty terminals for other purposes such as
relaying, etc.
‣
Wire correctly after checking the polarity and purpose of the
terminal.
‣
When wiring the instrument, separate from high voltage
cables, power lines, and motor lines to prevent inductive noise.
Transportation
‣
When transporting this instrument or the equipment with this
instrument incorporated in it, take measures to prevent
opening the door and falling out the inner module.
NOTE
Instruction
manual
‣
Deliver this instruction manual to an end user.
‣
prior to handing the instrument be sure to read this manual.
‣
If you have any question on this manual or fine any errors
omissions in this manual, contact our sales representative
‣
After reading this manual, keep it carefully by the instrument.
‣
When the manual, is lost or stained, contact our sales
representative.
‣
It is prohibited to copy or reproduce this manual without our
permission.
Checking the
accessories
‣
Upon delivery instrument, unpack and check its accessories and
appearance. if there are missing accessories or damage on the
appearance contact our dealer where you purchased the
instrument or our sales representative.
Installation
‣
When installing this instrument, put on a protective gear such
as safety shoes, helmet, etc. for your safety.
Maintenance
‣
Only our serviceman or persons authorized by NEWINS are
allowed to remove and take the inner module, the main unit
and printed circuit boards apart.
Disposal
‣
Disposed the used products in a correct way.
‣
Do not incinerate plastics of maintenance parts and
replacement parts. A harmful gas mat be produced.
‣
To disposed of this instrument, consign to the special agent as
an industrial waste.
Cleaning
‣
Use dry cloth to clean the surface of this instrument
‣
Do not use any organic solvent.
‣
Cleaning the instrument after turning off the power.
Revisions
‣
This instruction manual is subject to change without prior
notice.
Evasion of
responsibility
guarantee
‣
Be sure to observe the caution in operating, maintaining, and
repairing this instrument. We will not be responsible for or
guarantee the damage resulting from negligence of
them.
