8
5. When the AP reboot procedure is completed, you may change the TCP/IP properties of this
computer. Select the “
Obtain an IP address automatically
” instead of “
Use the following IP
Address
“ item if your local network has DHCP server service to assign IP address for your
wireless client. This step
will
set your computer as DHCP client and get IP from your DHCP
server via AP.
If there is no DHCP server in your network, then you should assign one proper IP address
manually to fit your network IP subnet.
6. For DHCP client, using following command to check if your computer already got IP address.
z
Win2000, WinXP, WinVISTA: type the “ ipconfig “ on your windows Command Prompt.
Once you got the IP address, subnet mask and default gateway, that means your computer
already connected to local network.
For detail configuration of this AP, please refer to the CD-ROM.
