Newer Technology miniStack v3, Руководство пользователя

Страница: 5 / 20

Newer Technology miniStack v3 Chapter 1 - Introduction
➀
➁
➂
➃
1.4 Port View & Interface Connections
The Newer Technology miniStack V3 has multiple interfaces to work with any
computer system.
➀
On/Off Switch - Used to turn the miniStack v3 on and off. As long as the power
switch is in the ON position, the miniStack v3 will power on and off with your com-
puter - no need to shut the enclosure off at the end of the day!
Note: If you have other devices daisy-chain connected to the miniStack v3, they will
also disconnect when turned off. This applies to devices using the miniStack v3 as a
hub as well.
➁
Power Receptacle - Used to power the miniStack. Please note that you are required
to power this drive from an outlet, it’s not able to be powered off of any of the connec-
tions to the computer.
➂
USB 2.0 Rear Ports - Add USB devices to your miniStack v3 here.
➃
USB 2.0
NWTMANFWU2MSV3
Uplink Port - Connect one of your computer’s USB
ports to the miniStack v3 here using the included cable.
➄
FireWire 800 (1394B) Ports - Connect one FireWire 800 port to your computer us-
ing the included cable and have an extra FireWire 800 to add peripherals with!
➅
eSATA Port - The utmost in speed. If you’re trying to make your miniStack v3 the
fastest it can be, attach an eSATA cable (not included) to this port.
➆
Security Slot - Secure your miniStack v3 to your desk using a Kensington Micro-
Saver Security Cable here (not included).
➇
FireWire 400 (1394A) Side Port - Easily connect your FireWire 400 devices here.
➈
USB 2.0 Side Port Easily connect USB devices to your miniStack v3 here.
1.5 Cable Connections & Quickstart Guide
Attachment of the cables is simple on any platform.
1. Plug the power input cord into the wall and to the Newer Technology miniStack V3.
2. Connect the eSATA, FireWire 800, FireWire 400, or USB 2.0 cable - appropriate for the
interface your computer supports, into the drive and computer. For best performance,
use the eSATA connection.
3. Turn the power switch on. The LED on the front of the NewerTech miniStack will
illuminate and flash with activity. You’re all set!
➄
➅
➆
➇
➈