newell DYMO RHINO 6000+, Руководство пользователя

Страница: 26 / 41

DRAFT
22
RHINO
™
6000+
User Guide
Vertical Breaker Label
The vertical breaker label is one of two types of labels for use on a breaker box.
See
Horizontal Breaker Label on page 22.
Use serialization to automatically populate the breakers. When all the breakers are
filled on the current label, a new label is created. See
Creating a Series of Labels
on page 12.
The label properties you can set are:
To create a vertical breaker label
1
Press BREAKER .
2
Select Vertical Breaker and press OK .
3
Select the properties desired.
4
Select Done (ESC) to create the label.
Each breaker is separated by a solid black line on the display.
5
Enter the text for each breaker in the label. Use the left or right arrow key to
move from breaker to breaker.
Horizontal Breaker Label
The horizontal breaker label is one of two types of labels for use on a breaker box.
See
Vertical Breaker Label on page 22.
Use serialization to automatically populate the breakers. When all the breakers are
filled on the current label, a new label is created. See
Creating a Series of Labels
on page 12.
The label properties you can set are:
# of breakers Maximum: 48 breakers
Single breaker
height
Minimum: 1/4” (6.35 mm); Maximum: 5” (126.9 mm)
# of poles Number of poles for each breaker. Maximum: 3
Print empty
breakers
Yes or No. Default is Yes.
Label layout Show label outline - Show label outline. Default is No.
Show separator lines - Print a separator line between each
port. (Default is Yes.)
Match/leader trailer - Blank space is equal at the beginning
and end of the label. Default is Yes.
# of breakers Maximum: 48 breakers
Single breaker
width
Minimum: 1/4” (6.35 mm); Maximum: 5” (126.9 mm)
Multiplier Multiplier for each breaker.
Minimum: 0.5
Maximum: 4
Can be manually entered in 0.5 increments, such as 2.5, 3.5 and so
on.
Print empty
breakers
Yes or No. Default is Yes.