7. TROUBLE SHOOTING
The stabilizing mode does not work.
Check that the batteries are installed properly. Check the charge
of the batteries. Replace if they are weak. Do not use old
batteries with new ones.
The image does not appear in focus.
Bring the inspected object to the center of the image. Turning the
eyepieces (8), adjust to achieve the clearest image on the screen.
If the view still does not seem in focus, clean the lenses. They
could be foggy or dusty.
Image is ‘waving’ when stabilizing mode has been engaged.
This is a typical ‘warming-up’ effect that will last for no more
than one minute after engaging the stabilizing mode.
Condensation accumulates on the parts
In order to avoid misting of the eyepiece lens in cold time use special
protective covers.
Image has disappeared during nighttime observation (using optional
night eyepieces).
When bright light gets into the objective lens of the night vision
device it may result in disappearing of the image as the
automatic shut-off feature comes into action to protect the
device. Whenever this happens, turn the switch to the OFF
position. In a minute or two the device will be ready for further
operation.
12
2. APPEARANCE OF THE DEVICE
1
–hand strap;
2
–power supply unit;
3
–power supply control indicator;
4
–power supply voltage switch;
5
–stabilizing mode engaging lever;
6
–
device front panel;
7
–neck strap;
8
–eyepieces;
9
–interpupillary
adjustment lever.
Fig. 1
For ease of operation, the device is fitted with neck strap (7) and
hand strap (1). Eyepieces (8), interpupillary adjustment lever (9)
and stabilizing mode engaging lever (5) are positioned on the
front panel (6) of the device. Power supply unit (2) is a
detachable part of the device.
Power supply voltage switch (4) and power supply control
indicator (3) are at the front of the device.
5
