background image

IMPORTANT INFORMATION

 

 

Read prior to activation 

 

You have just purchased a complicated electronic device, which 
emits invisible laser radiation.  To operate it properly, please 
read this manual carefully.  Here are some common precautions 
that must be noted. 

 

 

NEVER

 direct laser radiation at the eyes of people or animals 

 

NEVER 

stare into direct, scattered or reflected laser beam 

 

NEVER 

aim the unit at the sun or bright sources 

 

NEVER

 

subject the unit to impact while operating or being 

transported 

 

NEVER

 

transport the unit without the case 

 

NEVER

 

disassemble the unit. This device contains high voltage 

components, which may be hazardous for you!

 

 

 

NEVER

 

reverse polarity of the battery 

 

ALWAYS

 keep the unit out of the reach of children 

 

ALWAYS

 

remove the battery when the device is not in use for a 

long period 

 

ALWAYS

 

store in a warm dry place when the device is not in use 

 

Caution

 - use of controls or adjustments, or performance of 

procedures other than those specified herein may result in 
hazardous radiation exposure 

 

Caution

 - the use of optical instruments such as binoculars, loupes, 

mirrors, lenses, etc. with this product increases eye hazard 

 

 

NOTES: 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание LRB 7x50











Отзывы: