14
To activate the
Scanning
regime press and hold the A button
in the Ready mode. The unit will work in the
Scanning
regime while the A button is pressed.
The
Scanning
or
Individual Measurement
regimes are
available for any selected mode of measurement. When two
parameters are measured in the
Scanning
regime though both
will be quickly displayed, the second one may be difficult to
register by eye. Nevertheless all data is recorded and may be
recalled (see
Data Recall mode
for details.)
Operation and service modes
The unit has the following modes of operation:
Ready to Measure
– to perform measurements
(Quick link to the
Standard1
set of measurement
parameters appears in mode selection menu for
convenience and does not constitute a separate
mode)
Setup
– to modify the
Ready to Measure
mode
parameters,
Data Recall
– to recall the last 10 measurement results,
Data Clearance –
to clear measurement results.
In the
Setup
mode four parameters of measurement can be
set; these parameters define:
1.
What the unit measures: distance or azimuth or both
2.
In what units the result of distance measurement is
displayed: meters or yards, degrees
