Newcon Optik DN482 Скачать руководство пользователя страница 2

IMPORTANT INFORMATION

 

 

Read prior to activation

 

You have just purchased a complicated electronic device.  To 
operate it properly, please read this manual carefully.  Here are 
some common precautions that must be noted. 

 

 

NEVER

 

disassemble the unit. This device contains high voltage, 

which may be hazardous to your health!  

 

 

NEVER

 aim active unit at intense light sources (i.e. lights, 

headlamps, campfires, the moon, etc.) 

 

 

NEVER

 

reverse the polarity of a battery 

 

 

NEVER

 

connect the unit to external power sources 

 

 

ALWAYS

 

remove batteries when not in use for a long period 

 

 

ALWAYS

 

keep the objective lenses covered when not in use 

 

 

ALWAYS

 store in a warm dry place when not in use 

 
 

FEATURES OF THE DN482/483 NIGHT-VISION 
SCOPE 

 

 

 

Long range of vision (400-700 m) 

 

High photo cathode sensitivity for low light levels (10

-3

-10

-4

 

Lux - cloudy night sky). 

 

High resolution 18 mm Image Intensifier  Tube and special 
light-collecting optics provide bright, sharp image of consistent 
quality in the center and on the edges 

 

Recoil proof at large caliber rifles (bullet output energy up to 
6500 J)  

 

Lit reticle with manual brightness adjustment 

 

High image quality within the whole field of view 

 

11. WARRANTY 

 

NEWCON OPTIK

 warrants this product against defects in material and 

workmanship for one year from the date of the original date of consumer's 
purchase, but no more than 18 months from the date of manufacturing.  
Should your Newcon product prove defective during this period, please 
bring the product securely packaged in its original container or an 
equivalent, along with proof of the date of original purchase, to your 
Newcon Dealer.  Newcon will repair (or at its option replace), the product 
or part thereof, which, on inspection by Newcon, is found to be defective 
in materials or workmanship

 

 

What This Warranty Does Not Cover: 
NEWCON

 is not responsible for warranty service should the product fail 

to be properly maintained or fail to function properly as a result of misuse, 
abuse, improper installation, neglect, damage caused by disasters such as 
fire, flood, lightning, improper electrical current, or service other than by a 
NEWCON Authorized Service. Postage, insurance, or shipping costs 
incurred in presenting your NEWCON product for warranty service are 
your responsibility. Please include a check or money order made out to 
NEWCON OPTIK for the amount of $10.00 to cover shipping and 
handling. This covers products shipped in USA or Canada only.

 

 

12. CUSTOMER SUPPORT 

 

Should you experience any difficulties with your Newcon OPTIK product, 
consult the enclosed manual. If the problem remains unresolved, contact 
our customer support department at (416) 663-6963 or Toll free at 1-877-
398-6666.  Our operating hours are 9am-5pm, Monday - Friday, Standard 
East Time. At no time should equipment be sent back to Newcon without 
following the instructions of our technical support department.  
Newcon accepts no responsibility for unauthorized returns. 

 

To locate NEWCON Authorized Dealer call: 

Tel: (416) 663-6963 Fax: (416) 663-9065  

Email: [email protected]

 

INTERNET: http://WWW.NEWCON-OPTIK.COM 

The defective products should be shipped to: 

In USA: 3310 Prospect Ave. Cleveland, OH 44115 

In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada 

International: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada 

 

19 

Содержание DN482











Отзывы: