Newco Vista Vend, Руководство по установке и эксплуатации

Страница: 5 / 28

5
6. Reinstall the coin box by aligning the “Remove-Install” arrow with the reference arrow on the bottom
of the coin box support. Rotate the coinbox clockwise until the “operate arrow” is lined up with the
reference arrow below.
7. Reinstall the 120-degree tray segment by grasping the horizontal slot in the center of the smallest tray
and lifting it to telescope the segment of trays up. Reinsert the tray segment into the vendor. Make
sure each of the four trays in the 120-degree segment are at the same height as the trays on the right
side and on the left side. If the trays are not the same height, the tray is not properly seated, and the
vendor will not operate.
8. Reinstall the front cover by placing it over the service opening and rotating the cover to the left until it
stops.
9. Turn the key counter clockwise ¼ turn to lock.
Operation : Product Purchase
1. To purchase a product from the Vista Vend,
rotate the carousel clockwise or counter-
clockwise by grasping the carousel rotating ring
and select a product to purchase. The product
you wish to purchase should be in the “Vend
Zone”
*See Figure 5
2. Align the right side of the compartment
containing the desired product with the right
side of the door opening.
*See Figure 6
3. Refer to the price posted on the tray level
containing the desired product.
4. Deposit coins in the coin box until enough credit
has been accumulated on the coin box display to
purchase the desired product.
5. Push the colored, numbered (1,2,3,4) button on
the coin box that corresponds to the color of the
door handle located above the product to be
purchased. *
See Figure 7
Fig 6
Fig 7
Fig 5