“LCD-1”
Liquid
Coffee
Dispenser
NEWCO Enterprises Phone: 1.800.325.7867 Fax: 1.636.925.0029 7.22.09
12 of 29
PN: 121314
Section 3
Service Level Programming Functions:
Sanitizing Instructions
Press the
+
switch to enter sanitize mode. SAN will appear in
the display.
(As shown in figure 14)
Remove the product BIBs from the machine and connect a
BIB of sanitizing solution to the PUMP BIB connector.
Place an empty decanter or other vessel under the dispense
area of the machine.
Press the “San” (
+)
switch on the display panel to begin
sanitizing.
When sanitizing cycle ends (2.5 minutes total: pump 45 sec.,
dwell 90 sec., & water 15 sec.), the buzzer alarm will sound
3 times if enabled during the “Set-Up Programming”.
Disconnect the BIB of sanitizing solution from the Pump BIB
connector.
SAn
Fig. 14
