Newco FKP-4, Руководство пользователя, Страница: 10 / 21

10
MACHINE PROGRAMMING CONT’D
Flowmeter Adjustment
:
This entry displays the value used to represent the amount
of liquid for one tick of the flow meter count. Each tick adjusts the value approximately 2/10 of
an ounce. While in this entry, pressing the A key will decrement and the B key will increment
this value. This can be used to fine-tune the amount of liquid that is dispensed. The default
value is 0.
Recipe Settings
: This entry takes the user into a sub menu to program the parameters
unique to each key. When this entry is accessed the display will change to SELECT BUTTON
indicating that the user should press the brew key (button B, C or D, E or F (see Fig 1)) to be
programmed. When a brew key is selected the display will show the first entry in the Button Set
up sub menu, SET BREW VOLUME. While SELECT BUTTON is displayed the user may exit back
to the Main menu by Pressing the Hot Water key (G), (see Fig 1).
With these seven entries in the BUTTON SET UP sub menu:
SET BREW VOLUME
: This entry sets the volume in ounces for this key to dispense. The
Range is from OFF to 16 ounces with the default set to 7ounces.
SET PRE-INFUSION VOLUME
: This entry sets the time of the pre-infusion pulse of
water in seconds. Range is 0 to 3.0. Default varies by drink.
SET COFFEE PUMP SPEED
: In this entry the user may set the pump strength in the
range of 10 to 100 strength with the default at 35. As with most of the entries button A and
button B (see Fig 1) will change the Pump Strength, incrementing or decrementing by one.
Pressing the Hot Water key (G), (see Fig 1) key will exit.
SET AIR PUMP SPEED
: In this entry the user may set the air pump strength in the range
of 30 to 100% with the default at 90. As with most of the entries button A and button B (see
Fig 1) will change the Air Pump Strength, incrementing or decrementing by one. Pressing the
Hot Water key (G), (see Fig 1) key will exit.
SET AIR PUMP TIME
: In this entry the user may set the air pump time in the range of 2 to
15 seconds with the default at 10. As with most of the entries button A and button B (see Fig
1) will change the Air Pump Time, incrementing or decrementing by one. Pressing the Hot
Water key (G), (see Fig 1) key will exit.
SET BREW PULSE TIME
: This entry sets the brew time in seconds for a 7-ounce cup of
coffee with on/off pulses. The range is from 0 to 30 seconds with the default varying by drink.
EXIT
: Exit to Main Programming Menu.