Newco Bistro 10, Руководство по эксплуатации

Страница: 30 / 32

2.10.14 30
Whipper System Maintenance-Cont’d
Replacing Worn Components-Cont’d
Pay extra attention when installing the impeller onto the whipper motor
shaft. The impeller has an indicator arrow that must be aligned with the
flat spot on the shaft for proper installation. If the impeller is forced
onto the shaft without properly aligning it, it will become extremely
difficult to remove the next time maintenance is required.
When installing the impeller onto the shaft, make certain that it clicks into position (figure2). If
the impeller is not pushed in far enough (figure 1), it will rub on the whipper chamber and
eventually seize. If it is installed too far on the shaft (figure 3), it may rub on the whipper base
and eventually seize. In both cases, the product will not mix properly and may cause a blockage in
the powder system outlet hose.