To charge the PP2.6 after each use:
1.
Turn your equipment off.
LED Battery Meter Light Indicators:
Voltage
11.2
11.4
11.5
11.7
11.8
12.0
12.1
12.3
12.4
12.6
Light#
1
2
3
4
5
6
7
8
9
10
Color
Red
Blinks
Red
Blinks
Yellow
Yellow
Yellow
Green
Green
Green
Green
Green
2.
Turn the bottom power
switch off; (0) pressed in.
Power switch light will go
out.
3.
Plug the female end of charging
power cord to the side of the unit as
shown above.
4.
Plug the charging cord to
your wall outlet.
5.
Turn the solid red power
switch to power off/charge as
shown above.
6.
The unit is fully charged when
the far right LED is lit (as shown).
3.
Revised: 9/2/2015
**Be sure to charge the
PP2.6 after every use as
damage to the
battery can occur**
