EcoCart
Assembly
Instructions
8/1/2016
Q
UESTIONS
?
C
ALL
781
‐
935
‐
3450
Pg.
5
Operating Tips:
1. Charge your battery before using it to ensure it is fully
charged. Simply plug the charger cord (located on
side of unit) into a standard wall unit.
2. Monitor the battery status meter on the cart.
4. Batteries SHOULD NOT be stored in a discharged state
for more than 1 or 2 days. They should be charged as
soon as possible after each use (otherwise it can void the
warranty). If a battery is left in a discharged state for a
period of time it may no longer take a charge.
5. Avoid exposing battery to heat, service life is shortened
at ambient temperatures above 85F.
6. When powering equipment on the cart, one can have
the charger plugged in if necessary. In this case, the AC
power will pass thru the charger and power your
equipment directly.
7. When the cart in not in use, the system charger can be
plugged into a wall outlet to ensure the battery remains in
optimal state. Turn the unit to the OFF position.
Be sure to charge your cart after every
use. Simply plug cart into wall outlet
.
Charging system is a trickle charger, so
leaving it plugged in will NOT damage the
battery.
3. Batteries
should
not be discharged
below 11.5 volts
as this will
shorten the life of
the battery.
